Fujitsu Siemens Computers E8110 manual Drive0 Selects the Drive0 Product, Serial ATA drive Number

Page 5

M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field

Options

Default

Description

 

 

 

 

 

 

 

 

Drive0

Selects the Drive0

The product

Display the type of device on this ATA/IDE interface. Pressing the

 

Serial ATA drive

number of the hard

Enter key selects the Serial ATA Drive0 submenu allowing additional

 

submenu

drive.

device configuration options for this interface.

 

 

 

 

Drive1:

Selects the Drive1

The product

Display the type of device on this ATA/IDE interface, if there is one.

 

Serial ATA drive

number of the

Pressing the Enter key selects the Serial ATA Drive1 submenu allow-

 

submenu

optical drive.

ing additional device configuration options for this interface.

 

 

 

 

 

Language:

■

English (US)

[English (US)]

The default setting differs between the US/European and the

 

■

Japanese (JP)

 

Japanese model. Selects the display language for the BIOS.

 

 

 

 

 

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Fujitsu LifeBook Series Entering the Bios Setup Utility Bios Setup UtilityUsing the TrustedCore Menu Navigating through the Setup UtilityI n M e n u Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersYear. MM/DD/YYYY for example 03/20/2007. You may Change each segment of the date separately. Move betweenSerial ATA drive Number Drive0 Selects the Drive0 ProductSerial ATA drive Number of the hard Logical Block Addressing LBA Following Setup items do not appearDrive0 Submenu of the Main Menu Drive1 Submenu of the Main Menu Cally identified by the BiosExiting from Main Menu Transfer Mode StandardFields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsSerial/Parallel Port Nal keyboard and mouse parametersUSB Features CPU FeaturesOptimization Scsi SubClass supportFIR User to set the mode for the infrared port Serial Port Disabled EnabledRed port is Enabled Printer or similar device. ECP Mode allows communicationKeyboard/Mouse Features Submenu of the Advanced Menu Display Internal Auto Video Features Submenu of the Advanced MenuInternal Device Configuration Submenu Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB Features Submenu of the Advanced MenuKey are enabled. Note that enabling this feature may cause USB devices are available without a USB-aware OSDisables this feature Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu Fields, Options and Defaults for the Security MenuHard Disk Security Submenu of the Security Menu Password Entry on Disabled Enabled Owner Information Submenu Owner Information Submenu of the Security MenuSecurity Chip Setting Submenu of the Security Menu Fields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceQuickBoot Disabled Enabled Enabled Fewer tests mean faster startup Boot-time DisabledExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuExcluded from boot order Drive0Bios Version L1 Cache 128 KB Bios Date Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information CPU Speed 16 GHz Memory SlotFields, Options and Defaults for the Exit Menu Exit Menu Leaving the Setup UtilityPower Off Exit Saving
Top Page Image Contents