HP Link Configuration Settings for J4100A and JetDirect 400N

Link Configuration Jumper Settings

The HP J4100A JetDirect 10/100Base-TX card provides link configuration jumpers that may be manually set if autonegotiation is not able to connect the card to the network. You can set the link operation for 100 Mbps Full Duplex, 100 Mbps Half Duplex, or 10 Mbps Half Duplex. (Note that reconfiguration of the hub or switch port may also be required.)

Link Configuration jumpers

For jumper setting definitions, refer to the following illustration.

Jumper	Jumper	Jumper	Description
P4	P3	P2
Auto	--	--	Default setting. JetDirect
			autonegotiates link speed and
			duplex mode
Man	Half	100	JetDirect is manually set for 100
			Mbps, Half-duplex
Man	Half	10	JetDirect is manually set for 10 Mbps,
			Half-duplex
Man	Full	100	JetDirect is manually set for 100
			Mbps, Full-duplex
Man	Full	10	JetDirect is manually set for 10 Mbps,
			Full-duplex

B-2 HP J4100A 10/100Base-TX Print Server