HP 400N manual Components face right for CopyJet CopyJet M printers

To install the card into the HP CopyJet and CopyJet M color printer-copiers

1.Turn off the printer and unplug the power cord.

2.Locate the HP modular I/O (MIO) slot at the back of the printer (see the figure below).

Components face right for CopyJet and

CopyJet M printers

3.If the slot has a cover plate, remove it.

4.Insert the card. Align the card with the guide rails in the printer.

5.Press the card into the slot until the card is firmly seated.

6.Tighten each thumbscrew a little at a time, alternating between each side until both of the screws are secure.

7.Connect the network cable to the card.

8.Connect the power cord and turn on the printer.

NOTE	For the HP J4100A JetDirect card (RJ-45 and
	BNC), you can connect to one of the Ethernet ports
	(only one Ethernet port is active at a time).
	For the HP J4105A JetDirect card (RJ-45 and DB9),
	you can connect to only one Token Ring port.

2-30 Installing the HP JetDirect Print Server Card