NOTE | For the HP J4100A JetDirect card |
| BNC), you can connect to one of the Ethernet ports |
| (only one Ethernet port is active at a time). |
| For the HP J4105A JetDirect card |
| you can connect to only one Token Ring port. |
|
|
To install the card into HP 2500C/CM Professional Series and HP DesignJet ColorPro GA Printers
1.Turn the printer off and unplug the power cord.
2.Locate the HP modular I/O (MIO) slot at the back of the printer.
3.If the slot has a cover plate, remove it.
4.Insert the card. Align the card with the guide rails in the printer.
5.Press the card into the slot until firmly seated and tighten each thumbscrew a little at a time, alternating between each side until both screws are secure.
6.Connect the network cable to the card.
