3.Press [Item] until CFG NETWORK=NO* appears.

4.Change the message to CFG NETWORK=YES* using the following buttons:

5 Series and 5Si Series printers

Press [+], then [Select]

Other printers

Press [+], then [Enter]

5.Press [Item] until CFG IPX/SPX=NO* appears.

6.Change this to CFG IPX/SPX=YES* by pressing [+], and then pressing [Select] or [Enter] depending on your printer model.

7.Press [Item] until FRAME=<Frame Type>* appears.

The asterisk (*) indicates the active frame type selected.

To change frame type, press [+] until the frame type that you desire appears, then press [Select] or [Enter] depending on your printer model. Be sure “*” appears alongside your selection.

8.To activate the printer and save your changes, press [On Line] (for LaserJet 5 Series printers, press [Go]).

To complete the print server configuration, see the HP JetDirect software installation guide included with the product.

3-6 Using the Control Panel for Printers

Page 54
Image 54
HP 400N manual Using the Control Panel for Printers