4Si Series printers (select the

MIO MENU

1 or

card slot being configured)

MIO MENU

2

5Si Series printers (select the

HP MIO 1

MENU or

card slot being configured)

HP

MIO

2

MENU

5 Series printers

HP

MIO

MENU

3.Press [Item] until CFG NETWORK=NO* appears.

4.Change the message to CFG NETWORK=YES* using the following buttons:

5 Series and 5Si Series printers

Press [+], then [Select]

Other printers

Press [+], then [Enter]

5.Press [Item] until CFG IPX/SPX=NO* appears.

6.Change this to CFG IPX/SPX=YES* by pressing [+], and then pressing [Select] or [Enter] depending on your printer model.

7.Press [Item] until SRC RT=<Source Routing>* appears.

The asterisk (*) indicates the active source-routing selection.

To change source routing, press [+] until the source routing that you desire appears, then press [Select] or [Enter] depending on your printer model. Be sure “*” appears alongside your selection.

8.To activate the printer and save your changes, press [On Line] (for LaserJet 5 Series printers, press [Go]).

To complete the print server configuration, see the HP JetDirect software installation guide included with the product.

3-8 Using the Control Panel for Printers

Page 56
Image 56
HP 400N manual Press Item until SRC RT=Source Routing* appears