Toshiba RAV-SM1102BT-E, RAV-SM1102CT-E Required parts for installation work Recommendation, 183

Revised : Mar. 2007

16. CORD HEATER INSTALLATION WORK

This is on installation for 2 HP and 3 HP Products

(RAV-SM563AT-E,RAV-SM803AT-E, RAV-SP562AT-E, RAV-SP802AT-E).

In case of 4 HP or 5 HP, refer to this installation as reference.

16-1. Required parts for installation work (Recommendation)

The above products conform to RoHS (2002/95/EC). Therefore when procuring and using the following recom- mended parts at local site, it is recommended to confirm each part conforms to RoHS before use.

No.	Part name	Q’ty	Specifications/Vendor	Remarks
1	Cord heater	1	Drain line heaters CSC2 (3.0m, 40W/m) by Flexelec com.	Procured locally
			(Please go to the following URL.)
			http://www.flexelec.com
2	Thermostat	1	US-622AXRLQE by ASAHI KEIKI	Procured locally
			Operating temperature: on 4 ± 4°C, off 15 ± 3°C
			A thermostat holder is incorporated with a thermostat in the package.
			(Please go to the following URL.)
			http://www.asahikeiki.co.jp/product/product.html
			On self-responsibility, you can use a product manufactured by other
			company (For example, Texas Instruments) if its characteristics are
			equivalent to those of ASAHI KEIKI. However, when the shape of the
			thermostat holder is different from that of ASAHI KEIKI, apply some
			treatment to No.14 thermostat fixing plate and then fix the holder.
3	Fuse	1	ES3-5000, 250V / 5A by NAGASAWA Electric Co.	Procured locally
			(Please go to the following URL.)
			http://www.nagasawa-el.co.jp/
			On self-responsibility, you can use a product manufactured by other
			company if its characteristics are equivalent to those of NAGASAWA
			Electric Co.
4	Fuse holder	1	GM1H-02 by NAGASAWA Electric Co.	Procured locally
			(Please go to the following URL.)
			http://www.nagasawa-el.co.jp/
			On self-responsibility, you can use a product manufactured by other
			company if its characteristics are equivalent to those of NAGASAWA
			Electric Co.
5	P-shape	13	Use heat-resistance, weatherproof and non-hydrolytic type.	Procured locally
	clamp		Material: 4-fluorinated ethylene copolymer
			Harness diameter: Ø5.9
			Use equivalence with the above specifications.
			11 pieces are used to fix the cord heater to the outdoor unit base plate.
			One piece is used to fix the power cord to the thermostat fixing plate.
			One piece is used to fix the power cord to the terminal fixing plate.
6	P-shape	1	Use heat-resistance, weatherproof and non-hydrolytic type.	Procured locally
	clamp		Material: 4-fluorinated ethylene copolymer
			Harness diameter: Ø9.1
			Use equivalence with the above specifications.
			One piece is used to fix the cord heater to the outdoor unit base plate.
7	Screw	12	Self-tapping screw type-B Ø4 × 6mm, truss head, stainless	Procured locally
			These screws are used to fix the cord heater to the outdoor unit base
			plate with P-shape clamp.
8	Screw	4	Self-tapping screw type-B Ø4 × 8mm, truss head, stainless	Procured locally
			Two screws are used to fix the thermostat fixing plate to the side cabinet (R).
			One screw is used to fix the power cord to the thermostat fixing plate.
			One screw is used to fix the power cord to the terminal fixing plate.
9	Screw	2	Self-tapping screw type-B Ø3.5 × 6mm, pan head	Procured locally
			These screws are used to fix the thermostat to the thermostat fixing
			plate with the thermostat holder.
10	Faston	2	#250 They are used for the connecting part to the thermostat.	Procured locally
11	Sleeve for	2	UL sleeve for #250	Procured locally
	Faston
12	Close-end	2	Use the most appropriate connector with the power cord diameter.	Procured locally
	connector

– 183 –