Toshiba RAV-SM803UT-E, RAV-SM1102CT-E, RAV-SM1102BT-E Cool, Outline of specifications, Remarks

No.	Item		Outline of specifications								Remarks
3	Room	1) Adjustment range Remote controller setup tem-
	temperature		perature (°C)
	control
				COOL/		Heating				Auto
				DRY		operation		operation
			Wired type	18 to 29		18 to 29			18 to 29
			Wireless type*	18 to 30		16 to 30			17 to 27
			* : Only for 4-way air discharge cassette type and
			Under ceiling type
		2) Using the item code 06, the setup temperature in									Shift of suction tempera-
			heating operation can be compensated.								ture in heating operation
			Setup data	0	2		4			6
			Setup temp.	+0°C	+2°C		+4°C			+6°C
			compensation
			Setting at shipment
			Setup data	2
4	Automatic	1) Based on the difference between Ta and Ts, the
	capacity control		operation frequency is instructed to the outdoor
	(GA control)		unit.
5	Air speed	1) Operation with (HH), (H), (L), or [AUTO] mode is									HH > H > L > LL
	selection		performed by the command from the remote control-
			ler.

2)When the air speed mode [AUTO] is selected, the air speed varies by the difference between Ta and Ts.

<COOL>

Ta (˚C)		A
+3.0
	HH	B
+2.5
	(HH)	C
+2.0
	H (HH)	D
+1.5
	H (HH)
+1.0
		E
	L(H)
+0.5
	L(H)
Tsc
	L(H)	F
-0.5
	L(L)	G

•Controlling operation in case when thermo of remote controller works is same as a case when thermo of the body works.

•If the air speed has been changed once, it is not changed for 3 minutes. However when the air volume is exchanged, the air speed changes.

•When cooling operation has started, the air speed selects a downward slope, that is, the high position.

•If the temperature is just on the difference boundary, the air speed does not change.

•Mode in the parentheses indicates one in automatic cooling operation.

– 63 –