Toshiba RAV-SM802CT-E Revised Mar, Outdoor Unit, No. Part name, Procedure, Remarks, Water-proof

Revised : Mar. 2007

14-2. Outdoor Unit

RAV-SM563AT-E, RAV-SM803AT-E

No. Part name Procedure Remarks

•Common

procedure	CAUTION	Valve
	Never forget to put on the gloves at
		cover
	working time, otherwise an injury will be
	caused by the parts, etc.

1. Detachment

1)Stop operation of the air conditioner, and turn off the main switch of the breaker for air conditioner.

2)Remove the valve cover. (ST1T Ø4 × 10L, 1 pc.)

• After removing screw, remove the valve	Wiring
cover pulling it downward.	cover

3)Remove wiring cover (ST1T Ø4 × 10L, 2 pcs.), and then remove connecting cable.

4)Remove the upper cabinet. (ST1T Ø4 × 10L, 2 pcs.)

•After taking off screws, remove the upper cabinet pulling it upward.

2. Attachment	Upper cabinet
1) Attach the waterproof cover.

CAUTION
Be sure to attach a waterproof cover.
If it is not attached, there is a possibility	Water-proof
that water enters inside of the outdoor	cover
unit.
	Cord clamp

2)Attach the upper cabinet. (ST1T Ø4 × 10L, 2 pcs.)

•Hook the rear side of the upper cabinet to claw of the rear cabinet, and then put

	it on the front cabinet.	Rear cabinet
3)	Perform cabling of connecting cables,
	and fix with cord clamp.
	(ST1T Ø4 × 10L 3 pcs.)
4)	Attach the wiring cover.
	(ST1T Ø4 × 10L, 2 pcs.)	Claw

5)Attach the valve cover. (ST1T Ø4 × 10L, 1 pc.)

•Insert the upper part of the upper cabinet, set hooking claw of the valve cover to the slit (at three positions) of the main body, and then attach it pushing upward.

– 134 –