Toshiba RAV-SM803UT-E, RAV-SM1102CT-E, RAV-SM1102BT-E Photo / Explanatory diagram, Procedure

No.	Photo / Explanatory diagram		Procedure
			Rework the side cabinet (L) to remove part of it.
	Side cabinet (L)	The area to be removed is indicated by the
			shaded lines in the left figure.
			After removing part of the side cabinet (L), deburr
			the edges of the side cabinet (L).
2-4

Delete

Perform end process and bundling of each cable.

Using fixing screws (Self-tapping screw type-B

Ø3.5 × 6mm), fix the thermostat to the thermostat

fixing plate.

Close-end connector

Thermostat

Perform end process for various lead cables and

insulation tape

connect them according to the wiring diagram.

Power cord

Attach #250 Faston and UL-approved sleeves

each to the end of lead cables which are con-

2-5

nected to the thermostat.

Using insulation tape, apply protective measures

Cord heater

to the connected parts by the close-end connec-

Thermostat

*

Transparent

tors.

fixing plate

L side

Using P-shape clamp and the screws (Self-

tapping screw type-B Ø4 × 8mm), fix the power

P-shape clamp

Fuse

cord to the thermostat fixing plate.

Fuse holder

When the power cord size does not match with P-

shape clamp, procure the most appropriate one at

the local site.

– 189 –