Toshiba RAV-SP1102UT-E, RAV-SM1102CT-E, RAV-SM1102BT-E Outline of specifications, Remarks

No.	Item	Outline of specifications	Remarks
17	Max. frequency 1)	This control is operated by selecting [AUTO] operation
	cut control	mode.
	2)	COOL operation mode: the frequency is controlled
		according to the following figure if To < 28°C.

Ta(˚C)+4 Normal control

Max. frequency is restricted

+3to approximately the rated cooling frequency

Tsc

3)HEAT operation mode: the frequency is controlled according to the following figure if To > 15°C.

It cannot be operated on the remote controller at indoor unit side. (Stop status is held.)

	Ta(˚C)
	Tsh
			Max. frequency is restricted
	–3		to approximately the rated
			heating frequency
	–4
		Normal control
18 DC motor	1) When the fan operation has started, positioning of the
	stator and the rotor are performed.
	(Moves slightly with tap sound)

2)The motor operates according to the command from the indoor controller.

NOTES :

•When the fan rotates while the air conditioner stops due to entering of outside air, etc, the air conditioner may oper- ated while the fan motor stops.

• When a fan locking is found, the air conditioner stops, and Check code [P12] an error is displayed.

– 69 –