Control temp C | Toshiba RAV-SM802BT-E, RAV-SM1102CT-E manual

No.	Item	Outline of specifications	Remarks

7	Freeze	1) The cooling operation (including Dry operation) is	Tcj : Indoor heat ex-
	preventive	performed as follows based on the detected tempera-	changer sensor
	control	ture of Tc sensor or Tcj sensor.	temperature
	(Low	When [J] zone is detected for 6 minutes (Following
	temperature	When [J] zone is detected for 6 minutes (Following
	temperature	figure), the commanded frequency is decreased from
	release)	the real operation frequency. After then the com-
		manded frequency changes every 30 seconds while
		operation is performed in [J] zone.
		In [K] zone, time counting is interrupted and the
		operation is held.
		When [I] zone is detected, the timer is cleared and the
		operation returns to the normal operation.
		If the commanded frequency becomes S0 because the
		operation continues in [J] zone, the return temperature
		A is raised from 5°C to 12°C until [I] zone is detected
		and the indoor fan
		operates with [M] mode.

(˚C)

In heating operation, the freeze-preventive control works if 4-way valve is not exchanged and the condi- tion is satisfied. (However the temperature for J zone dashing control is changed from 2°C to –5°C.)

8 High-temp	1) The heating operation is performed as follows based on
release control		the detected temperature of Tc sensor or Tcj sensor.
		•	When [M] zone is detected, the commanded fre-
			quency is decreased from the real operation fre-
			quency. After then the commanded frequency
			changes every 30 seconds while operation is per-
			formed in [M] zone.
		•	In [N] zone, the commanded frequency is held.
		•	When [L] zone is detected, the commanded fre-
			quency is returned to the original value by approx.
			6Hz every 60 seconds.
	Setup at shipment				Tc (˚C)		M
					Tc (˚C)
					Tcj A
		Control temp (°C)
		Control temp (°C)					N
			A	B			N
			A	B
					B
		56 (54)		52 (52)		L
		56 (54)		52 (52)

	NOTE :
	NOTE :
	When the operation has started or when Tc or Tcj became							Same when thermostat is
	lower than 30°C after start of the operation, temperature							turned off.
	is controlled between values in parentheses of A and B.

– 65 –

RAV-SP1102UT-E, RAV-SM562BT-E, RAV-SM562CT-E, RAV-SM563AT-E, RAV-SM802BT-E specifications

Toshiba, a prominent player in the HVAC sector, has engineered a range of advanced air conditioning systems that cater to diverse environments and needs. Among their standout offerings are the RAV-SM562BT-E, RAV-SM1102CT-E, RAV-SM563AT-E, RAV-SM1403UT-E, and RAV-SM803UT-E models. Each of these systems embodies Toshiba's commitment to energy efficiency, innovative technology, and user-centric design.

The RAV-SM562BT-E model is designed for residential and light commercial use, boasting a cooling capacity of 5.6 kW and a heating capacity of 6.7 kW. It incorporates Toshiba’s advanced inverter technology, ensuring optimal performance and reduced energy consumption. The unit features a sleek, modern design and operates quietly, making it perfect for environments where noise levels must be controlled.

Next in line is the RAV-SM1102CT-E, which excels in larger commercial spaces. With a remarkable cooling output of 11.2 kW and heating performance to match, this unit is engineered for heavy-duty usage. It employs a multi-split system, allowing several indoor units to connect to a single outdoor unit. This provides homes or businesses with flexible installation options without sacrificing comfort or style.

The RAV-SM563AT-E model presents a perfect blend of efficiency and effectiveness, focusing on eco-friendliness. With an impressive seasonal energy efficiency ratio (SEER), it minimizes energy bills while maintaining superior performance. This model is equipped with advanced filtration technology that not only cools or heats the air but also improves indoor air quality by capturing dust and allergens.

Designed for high-performance requirements, the RAV-SM1403UT-E offers cooling and heating capacities of 14.0 kW. This unit is hardy enough for industrial applications but remains efficient and easy to operate. The incorporation of Toshiba’s Smart Control technology allows users to manage their systems remotely, enhancing convenience.

The RAV-SM803UT-E completes the lineup, combining 8.0 kW cooling and heating outputs with cutting-edge technology. It features adaptive comfort control, which adjusts the temperature based on occupancy and external conditions, ensuring optimal comfort while maintaining energy efficiency.

In conclusion, Toshiba's range of RAV-SM series models offers innovative features, advanced technology, and effective performance. These models not only meet the demands of modern spaces but also shine in energy efficiency, making them excellent choices for both residential and commercial applications. By addressing the diverse requirements of users, Toshiba continues to uphold its reputation as a leader in HVAC solutions.

Toshiba RAV-SM802BT-E, RAV-SM1102CT-E, RAV-SM1102BT-E, RAV-SM1403UT-E, RAV-SM1402CT-E Control temp C

Models: RAV-SP1102UT-E RAV-SM562BT-E RAV-SM562CT-E RAV-SM563AT-E RAV-SM802BT-E RAV-SM802CT-E RAV-SM803UT-E RAV-SM803AT-E RAV-SM1402BT-E RAV-SM1103UT-E RAV-SM1402CT-E RAV-SM1403UT-E RAV-SM1102BT-E RAV-SM1102CT-E

Outline of specifications

figure), the commanded frequency is decreased from

release)

the real operation frequency. After then the com-

manded frequency changes every 30 seconds while

operation is performed in [J] zone.

In [K] zone, time counting is interrupted and the

operation is held.

When [I] zone is detected, the timer is cleared and the

operation returns to the normal operation.

If the commanded frequency becomes S0 because the

operation continues in [J] zone, the return temperature

A is raised from 5°C to 12°C until [I] zone is detected

and the indoor fan

operates with [M] mode.

In heating operation, the freeze-preventive control works if 4-way valve is not exchanged and the condi- tion is satisfied. (However the temperature for J zone dashing control is changed from 2°C to –5°C.)

8 High-temp

1) The heating operation is performed as follows based on

release control

the detected temperature of Tc sensor or Tcj sensor.

When [M] zone is detected, the commanded fre-

quency is decreased from the real operation fre-

quency. After then the commanded frequency

changes every 30 seconds while operation is per-

formed in [M] zone.

In [N] zone, the commanded frequency is held.

When [L] zone is detected, the commanded fre-

quency is returned to the original value by approx.

6Hz every 60 seconds.

Setup at shipment

Control temp (°C)

RAV-SP1102UT-E, RAV-SM562BT-E, RAV-SM562CT-E, RAV-SM563AT-E, RAV-SM802BT-E specifications