Toshiba RAV-SM562BT-E, RAV-SM1102CT-E Cabling and Setting of Remote Controller Control

12-1-2. Cabling and Setting of Remote Controller Control

2-remote controller control (Controlled by two remote controllers)

One or multiple indoor units are controlled by two remote controllers.

(Max. 2 remote controllers are connectable.)

•1 indoor unit is controlled by 2 remote controllers

Remote controller	Remote controller
switch (Master)	switch (Sub)
Sold separately	Sold separately
A B	A B
	Remote controller
	cables (Procured locally)
	Terminal block for
	remote controller cables

AB Indoor unit 1 2 3

<Wireless remote controller>

(4-Way Air Discharge Cassette Type only)

How to set wireless remote controller to sub remote controller

Change OFF of Bit [3: Remote controller Sub/Master] of switch S003 to ON.

	S003	Bit 1 : OFF to ON
		ON	3	2	1
Sensor		4
cover
		Sensor P.C. board

Adjust corner cap

[Operation]

1.The operation contents can be changed by Last- push-priority.

2.Use a timer on either Master remote controller or Sub remote controller.

1 2 3

Outdoor unit

(Setup method)

One or multiple indoor units are controlled by two remote controllers.

(Max. 2 remote controllers are connectable.)

<Wired remote controller>

How to set wired remote controller as sub remote controller

Change DIP switch inside of the rear side of the remote controller switch from remote controller master to sub. (In case of RBC-AMT31E)

Remote controller (Inside of the rear side)

1 2

Sub remote controller

Master remote controller

1 2

DIP switch

1 2

<Wireless remote controller>

(Except 4-Way Air Discharge Cassette Type and Under Ceiling Type)

How to set wireless remote controller as sub remote controller

Turn Bit [3: Remote controller Sub/Master] of the switch S003 from OFF to ON.

Rear cover

ON

1 2 3 4 ON

Sensor P.C. board

	S003
Upper case	Bit 3 : OFF →		ON
	ON
	1	2 3 4	ON

<Wireless remote controller> (Under Ceiling Type only)

How to set wireless remote controller to sub remote controller

Change OFF of Bit [3: Remote controller Sub/Master] of switch S003 to ON.

	4	3	2 1
2 3 4	ON

– 110 –