Toshiba RAV-SM1403UT-E No. Part name, Procedure, Remarks, Discharge port, Side cabinet

No. Part name Procedure Remarks

‚Discharge port 1. Detachment

cabinet	1)	Perform work of item 1 of •.
	2)	Take off screws (ST1T Ø4 × 10L, 3 pcs.)	Side cabinet
		of discharge port cabinet for the partition
		plate.
	3)	Take off screws (ST1T Ø4 × 10L, 2 pcs.)	Inverter
		of discharge port cabinet for the bottom
		plate.
	4)	Take off screw (ST1T Ø4 × 10L, 1 pc.) of	Fin guard
		discharge port cabinet for the heat
		exchanger.

5)Take off screws (ST1T Ø4 × 10L, 2 pcs.) of discharge port cabinet for the fin guard.

2. Attachment

1)Put the upper left side of the discharge port cabinet on the end plate of the heat exchanger, and then fix it with screw. (ST1T Ø4 × 10L, 1 pc.)

2)Attach the removed screws to the original positions.

End plate of the	Discharge port
heat exchanger

ƒ Side cabinet	1) Perform work of item 1 of •.
	2)	Remove screw fixing the inverter and the
		side cabinet. (ST1T Ø4 × 10, 1 pc.)
	3)	Remove screws of the side cabinet and
		the valve support plate.
		(ST1T Ø4 × 10, 2 pcs.)
	4)	Remove screw of the side cabinet and the
		cabling panel (Rear).
		(ST1T Ø4 × 10, 1 pc.)
	5)	Remove screw of the side cabinet and the
		bottom plate. (ST1T Ø4 × 10, 1 pc.)	Valve support plate
	6)	Remove screw of the side cabinet and the	Side cabinet
		fin guard (Heat exchanger).
		(ST1T Ø4 × 10, 2 pcs.)	Inverter
			Side cabinet

Valve support	Cabling panel
plate	(Rear)

– 142 –