Toshiba RAV-SM563AT-E 4, 5, Outline of test operation from the wireless remote controller

<In case of wireless remote controller>

Procedure						Description
	Turn on power of the air conditioner.
1
	The operation is not accepted for 5 minutes when power has been turned on at first time after installation,
	and 1 minute when power has been turned on at the next time and after. After the specified time has
	passed, perform a test operation.
2	Push [Start/Stop] button and change the operation mode to [COOL] or [HEAT] with [Mode] button.
	Then change the fan speed to [High] using [Fan] button.
		Test cooling operation							Test heating operation
3
	Set temperature to [18°C] using [Temperature set]						Set temperature to [30°C] using [Temperature set]
	button.						button.
4	After checking the receiving sound “Pi”, immediately						After checking the receiving sound “Pi”, immediately
	push [Temperature set] button to set to [19°C]						push [Temperature set] button to set to [29°C].
5	After checking the receiving sound “Pi”, immediately						After checking the receiving sound “Pi”, immediately
	push [Temperature set] button to set to [18°C].						push [Temperature set] button to set to [30°C].
	Then repeat the procedure 4 → 5 →				4 → 5 .
6	After approx. 10 seconds, all the display lamps on the sensor part of wireless remote controller,
	[Operation] (Green), [Timer] (Green), and [Ready] (Yellow) flash and the air conditioner starts operation.
	If the lamps do not flash, repeat the procedure 2 and after.
7	After the test operation, push [Start/Stop] button to stop the operation.
<Outline of test operation from the wireless remote controller>
Test cooling operation:
Start →	18°C →	19°C →	18°C →	19°C →	18°C →	19°C →		18°C →	(Test operation) →	Stop
Test heating operation:
Start →	30°C →	29°C →	30°C →	29°C →	30°C →	29°C →		30°C →	(Test operation) →	Stop

Be sure to set the air speed to [High]

2	3,	4, 5, 6
	2,	7

– 108 –