Toshiba RAV-SM1103UT-E Under Ceiling Type, No. Part name, Procedure, Remarks, while pushing hook

14-1-3. Under Ceiling Type

RAV-SM562CT-E, RAV-SM802CT-E, RAV-SM1102CT-E, RAV-SM1402CT-E

Be sure to turn off the power supply or circuit breaker before disassembling work

No. Part name	Procedure	Remarks
• Suction grille	1. Slide the suction grille fixing	Pull out suction grille
	knobs (2 positions) toward the	while pushing hook.
	arrow direction of left figure, and
	open the suction grille.	Hinge

2. Under the condition of the suction grille opened, push the hook section of hinges (2 posi- tions) at the rear side, and then pull out the suction grille.

Suction grille	Suction grille
fixing knob

‚ Side panel	1.	Open the suction grille.
	2.	After removing the side panel	Protector
		screws (2 positions), slide the
			Side panel
		side panel forward and then
		remove it.

			Level flap
			Slide forward.
ƒ Electrical	1.	Remove the suction grille.	Electrical parts cover
parts box	2.	Loosen the set screws (2 posi-
		tions) of the electrical parts
		cover.
	3.	Remove the electrical parts
		cover.
	4.	Remove the set screws	3	-2
		(2 positions) of the electrical	3	-3
		parts box.	Screws
	5.	Remove the electrical parts box.
			(Fixing electrical parts cover and box)

In this time, remove connectors of TA sensor, TC sensor and TCJ sensor if necessary.

3 -4

3 -5

Electrical parts box

Screws

(Fixing electrical parts box and main unit)

– 130 –