Toshiba RAV-SM803UT-E, RAV-SM1102CT-E, RAV-SM1102BT-E CN301, *CN303 CN300, Revised Mar, P22 error

Revised : Mar. 2007

[P22 error]

Are connections of CN301 and
CN300 of P.C. board correct?
	YES
Does the fan rotate without trouble			NO
when handling the fan with hands under condition
of removing CN301 and CN300 from P.C. board?
	YES
The status that the resistance values
between leads below are 50 to 80W
for 40Wmotor (ICF-140-40) and 25 to 55W			NO
for 60Wmotor (ICF-140-60-1) is normal.
Between	1 (Red lead) and	2 (White lead)
Between	2 (White lead) and	3 (Black lead)
Between	3 (Black lead) and	1 (Red lead)
of motor winding of connector (CN301)
	YES
	The status that there is
5k to 20kΩ resistance values between			NO
1 (Yellow lead) and 4 (Pink lead)
of motor position detection of
connector (CN300) is normal.
	YES

CN301, *CN303

CN300

CN300 : Motor coil winding

*CN301 : Motor position detection

CN301, CN303 : Motor coil winding

CN300, CN302 : Motor position detection

SM110, SM140, SP56, SP80, SP110, SP140

Normal fan motor

(Control or CDB P.C. board)

(Control P.C. board or CDB P.C. board)

NOTE :

Defective fan motor

However, GND circuit error inside of the motor is rarely detected even if the above check is carried out. When the circuit does not become normal even if P.C. board has been replaced, replace outdoor fan motor.

		Single phase
	RAV-SM563AT-E	RAV-SP562AT-E, SP802AT-E	RAV-SP1102AT-E, SP1402AT-E
	RAV-SM803AT-E	RAV-SM1103AT-E, SM1403AT-E
Objective P.C. board	Control P.C. board	CDB P.C. board	CDB P.C. board
Fan motor winding	CN300	CN301	CN301/CN303
Motor position detection	CN301	CN300	CN300/CN302

– 91 –