Toshiba RAV-SM1103UT-E, RAV-SM1102CT-E E10 error, E18 error, E08, L03, L07, L08 error, L09 error

[E10 error]

Check indoor control P.C. board (MCC-1402).

Defect Replace

[E18 error]

		NO
Is inter-unit cable of A and B normal?				Correct inter-unit cable of remote controller.
	YES
Is there no disconnection		YES
				Correct connection of connector.
or contact error of connector on harness
				Check circuit cables.
from terminal block of indoor unit?
	NO
		YES			NO
Is group control operation?			Is power of all indoor units turned on?
	NO

Check indoor P.C. board (MCC-1402). Defect Replace

Check power connection of indoor unit. (Turn on power again.)

[E08, L03, L07, L08 error]

E08 : Duplicated indoor unit numbers

L03 : Two or more master units in a group control

L07 : One or more group addresses of [Individual] in a group control

L08 : Unset indoor group address (99)

If the above is detected when power has been turned on, the mode automatically enters in automatic ad- dress setup mode. (Check code is not displayed.)

However, if the above is detected during automatic address setup mode, the check code may be displayed.

[L09 error]

YES

Is capacity of indoor unit unset?

NO

Set capacity data of indoor unit. (Setup item code (DN) = 11)

Check indoor P.C. board (MCC-1402). Defect Replace

– 88 –