Toshiba RAV-SM1102CT-E, RAV-SM1102BT-E Attachment, Detachment, Part name, Procedure, Remarks

No. Part name Procedure Remarks

‰Pulse Modulating 1. Detachment

Valve (P.M.V.) coil 1)	Perform works of items • and ‚.	PMV body Positioning extrusion
2)	Release the coil from the concavity by
	turning it, and remove coil from the
	P.M.V.
2. Attachment
1)	Put the coil deep into the bottom
	position.
2)	Fix the coil firmly by turning it to the
	concavity.
		PMV coil	Concavity

Š Fan guard	1. Detachment	Minus screwdriver
	1) Perform works of items 1 of •, and ‚.
	2) Remove the front cabinet, and put it
	down so that fan guard side directs
	downward.
	CAUTION
	Perform works on a corrugated card-
	board, cloth, etc. to prevent flaw on the
	product.
	3) Remove the hooking claws by pushing	Hooking claw	Front cabinet
	with minus screwdriver along with the
	arrow mark in the right figure, and
	remove the fan guard.	Front cabinet

2. Attachment

1)Insert claws of the fan guard in the hole of the front cabinet. Push the hooking claws (10 positions) with hands and then fix the claws.

CAUTION

All the attaching works have completed. Check that all the hooking claws are fixed to the specified positions.

Fan guard

– 140 –