Toshiba RAV-SM802BT-E No. Part name, Procedure, Remarks, Perform work on a corrugated card

No. Part name Procedure Remarks

11 Fan guard	1.		Detachment	Discharge
	1)		Perform works of items 1 of • and ‚.
				port cabinet
	2)		Remove the air flow cabinet, and put it
			down so that the fan guard side directs	Bell mouth
			downward.
		Perform work on a corrugated card-
		board, cloth, etc. to prevent flaw to the		Remove
		product.		two screws

3)Take off screws fixing the bell mouth. (ST1T Ø4 × 10L, 2 pcs.)

4)	Remove the bell mouth.	Bell mouth
5)	Remove the hooking claws by pushing
	with minus screwdriver along with the
	arrow mark as shown in right figure.

2. Attachment		Discharge
1) Insert claw of the fan guard in hole of the		port cabinet
discharge panel. Push the hooking claws	Minus screwdriver	Fan guard
(5 positions) with hands and fix the claws.

After all the attachment works are completed, check that all the hooking claws are fixed to the specified posi- tions.

2)	Mount the bell mouth by hooking three
	claws at upper side of the bell mouth in
	the slits on the discharge cabinet.
3)	After attachment, fix the bell mouth with	Hooking claw
	screws. (ST1T Ø4 × 10L, 2 pcs.)
		Discharge port cabinet

Slit (3 positions)

Bell mouth

Claw (3 positions)

– 149 –