Toshiba RAV-SM1102BT-E Revised Mar, No. Part name, Procedure, Remarks, Front, of cabinet

Revised : Mar. 2007

RAV-SM1103AT-E, RAV-SM1403AT-E / RAV-SP562AT-E, RAV-SP802AT-E

No. Part name Procedure Remarks

•Common

procedure	CAUTION
Never forget to put on the gloves at
working time, otherwise an injury will be
caused by the parts, etc.		Front
		cabinet
1. Detachment
1)	Stop operation of the air conditioner, and
	also turn off switch of the breaker.
2) Remove the front panel.
	(ST1T Ø4 × 10L, 3 pcs.)
	• After taking off screws, remove the front
	panel by pulling it downward.
3) Disconnect the connecting cables and
	power cord from the terminals and cord	Upper plate
	clamp.
		of cabinet

4) Remove the upper cabinet. (ST1T Ø4 × 10L, 6 pcs.)

2. Attachment

1) Attach the waterproof cover.

Water-proof cove

CAUTION

Be sure to attach a waterproof cover.

If it is not attached, there is a possibility that water enters inside of the outdoor unit.

2)Attach the upper cabinet. (ST1T Ø4 × 10L, 6 pcs.)

3)Connect the connecting cable and power cord at the terminal and fix them with cord clamp.

CAUTION

Using bundling band sold at a market, be sure to fix the power cables and indoor/ outdoor connecting cables along the inter- unit cable so that they do not come to contact with the compressor, valves and cables at gas side, and the discharge pipe.

4)Attach the front cabinet. (ST1T Ø4 × 10L, 3 pcs.)

– 141 –