Configuring Novell NetWare Frame Types
You can set the NetWare frame types if the NetWare protocol is enabled (NETWORK=NOVELL→ or NETWORK=AUTO→ was displayed on your control panel). You can configure one of the following frame- type settings:
Novell NetWare Frame Types
on an HP JetDirect Ethernet Card
Frame Type | Description |
|
|
AUTO (default) | Automatically senses and limits the frame type to the one |
| detected. |
|
|
EN_8023 | Limit frame types to IPX over IEEE 802.3 frames. All others |
| will be counted and discarded. |
|
|
EN_II | Limit frame types to IPX over Ethernet frames. All others |
| will be counted and discarded. |
|
|
EN_8022 | Limit frame types to IPX over IEEE 802.2 with IEEE 802.3 |
| frames. All others will be counted and discarded. |
|
|
EN_SNAP | Limit frame types to IPX over SNAP with IEEE 802.3 |
| frames. All others will be counted and discarded. |
|
|
Novell NetWare Frame Types
on an HP JetDirect Token Ring Card
Frame Type | Description |
|
|
AUTO (default) | Automatically senses and limits the frame type to the |
| one detected. |
|
|
TR_8022 | Limit frame types to IPX over IEEE 802.2 LLC with IEEE |
| 802.5 frames. All others will be counted and discarded. |
|
|
TR_SNAP | Limit frame types to IPX over SNAP with IEEE 802.5 |
| frames. All others will be counted and discarded. |
|
|
