To install a card into the upper MIO slot of the HP LaserJet 4Si and 4Si MX printers

NOTE

To use the upper slot of an HP LaserJet 4Si or 4Si

 

MX printer, you must assemble two cards together

 

and insert them both into the printer at the same

 

time. To assemble the cards together, the card to be

 

used in the upper slot must be fitted with a custom

 

cover plate. Custom cover plates must be ordered

 

from Hewlett-Packard:

 

•C2009-60111 (for HP J4105A or J4106A)

1.Turn off the printer and unplug the power cord.

2.Remove the existing card from the lower MIO slot of the printer. (You will assemble this card to the new card later.)

Remove card from lower MIO slot

3. Remove the protective cover from the upper MIO slot.

2-20 Installing the HP JetDirect Print Server Card