Components face left for Color LaserJets (including 5/5M)

3.If the slot has a cover plate, remove it.

4.Insert the card. Align the card with the guide rails in the printer.

5.Press the card into the slot until firmly seated and tighten each thumbscrew a little at a time, alternating between each side until both screws are secure.

6.Connect the network cable to the card.

7.Connect the power cord and turn on the printer.

NOTE

For the HP J4100A JetDirect card (RJ-45 and

 

BNC), you can connect to one of the Ethernet ports

 

(only one Ethernet port is active at a time).

 

For the HP J4105A JetDirect card (RJ-45 and DB9),

 

you can connect to only one Token Ring port.

 

 

2-14 Installing the HP JetDirect Print Server Card

Page 28
Image 28
HP 400N manual Components face left for Color LaserJets including 5/5M