4
Using the Control Panel
To Configure HP JetDirect Cards
in
Introduction
If you have an HP DesignJet printer listed below, you can manually configure certain network parameters using the printer control panel:
•DesignJet 3000CP/3500CP
•DesignJet 2000CP/2500CP
•DesignJet 755CM
•DesignJet 750C Plus
•DesignJet 750C
•DesignJet 700
•DesignJet 650C
•DesignJet 600
NOTE | For HP DesignJet ColorPro GA printers, see |
| chapter 3. |
|
|
You can use the printer control panel to do the following:
•enable or disable network protocols
•configure Novell NetWare frame types
•configure Novell NetWare source routing for Token Ring networks
•configure TCP/IP parameters
•configure Apple EtherTalk Phase parameters for Ethernet networks
•configure timeout for sensing the end of a job
NOTE | The above parameters can also be configured using |
| the HP JetDirect software. |
|
|
HP DesignJet 4 Control Panel
Control Panel for
