3
Using the Control Panel To Configure HP JetDirect Cards in Printers
Introduction
If you have an HP DesignJet
The printers listed below have control panels that let you configure certain network parameters manually.
•HP Color LaserJet and Color LaserJet Series (5, 5M)
•HP LaserJet 5Si Series (5Si, 5Si MX, 5Si NX, 5Si Mopier)
•HP LaserJet 5 Series (5, 5M, 5N)
•HP LaserJet 4Si Series (4Si, 4Si MX)
•HP LaserJet 4V Series (4V, 4MV)
•HP LaserJet 4 Plus Series (4 Plus, 4M Plus)
•HP LaserJet 4 Series (4, 4M)
•HP Professional Series (2500C, 2500CM)
•HP DesignJet ColorPro GA printer
You can use the printer control panels to do the following:
•enable or disable network protocols
•configure Novell NetWare frame types
•configure Novell NetWare source routing for Token Ring networks
•configure TCP/IP parameters
•configure Apple EtherTalk Phase parameters for Ethernet networks
•for the HP LaserJet 4, 4M printers, configure the timeout setting for sensing the end of a job
NOTE | The above parameters can also be configured using |
| the HP JetDirect software. |
|
|
Once you have configured these parameters using the control panel, you still need to install the appropriate print server software to complete the configuration process. Refer to your HP JetDirect software installation guide for instructions.
3 Printer Control Panel
Using the Control Panel for Printers
