4.Insert the card. Align the card with the guide rails in the printer.
5.Press the card into the slot until firmly seated and tighten each thumbscrew a little at a time, alternating between each side until both screws are secure.
6.Connect the network cable to the card.
7.Connect the power cord.
8.For the HP DeskJet 1200C, 1600C, 1600CM and 1600CN printers, turn on the power switch.
NOTE | For the HP J4100A JetDirect card |
| BNC), you can connect to one of the Ethernet ports |
| (only one Ethernet port is active at a time). |
| For the HP J4105A JetDirect card |
| you can connect to only one Token Ring port. |
