Fujitsu Siemens Computers C2310 manual Menu Field, Options, Default, Description

Page 7
Manual background

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

 

Menu Field

Options

Default

Description

 

 

 

 

 

 

Sectors:

• A number

–—

This appears only when Hard Disk is selected. When it is selected, you can

 

 

between

 

change the value. This field is incremented by pressing the [Spacebar]. This

 

 

0 and 63

 

field is decremented by pressing the [-] key. The field can also be changed by

 

 

 

 

 

 

 

 

typing in the number.

 

 

 

 

 

 

Maximum

• Display only

–—

Displays the maximum capacity of the drive calculated from the

 

Capacity:

 

 

parameters of the hard disk when Hard Disk is selected.

 

 

 

 

 

 

LBA Format (Logical Block Addressing)

 

 

 

 

 

 

 

Total

–—

–—

The total number of sectors on your hard disk.

 

Sectors:

 

 

 

 

 

 

 

 

 

Maximum

–—

–—

The maximum capacity of your hard disk.

 

Capacity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multi-

• Disabled

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the number of

 

Sector Trans-

• 2 Sectors

 

sectors per block for multiple sector transfer.

 

fers:

• 4 Sectors

 

 

 

 

• 8 Sectors

 

 

 

 

• 16 Sectors

 

 

 

 

 

 

 

 

LBA Mode

• Disabled

[Enabled]

Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector

 

Control:

• Enabled

 

addressing. This can’t be changed when Auto is selected.

 

 

 

 

 

 

Transfer

• Standard

[Multiword

Selects the method for moving data to/from the drive. Autotype the drive to

 

Mode:

• Fast PIO 1

DMA 2]

select the optimum transfer mode. This option cannot be changed when

 

 

• Fast PIO 2

 

Auto is selected.

 

 

• Fast PIO 3

 

 

 

 

• Fast PIO 4

 

 

 

 

• Multiword

 

 

 

 

DMA 1

 

 

 

 

• Multiword

 

 

 

 

DMA 2

 

 

 

 

 

 

 

 

Ultra DMA

• Disabled

[Disabled]

Selects the method for moving data to/from the drive. Autotype the drive to

 

Mode:

• Mode 0

 

select the optimum transfer mode. This option cannot be changed when

 

 

• Mode 1

 

Auto is selected.

 

 

• Mode 2

 

 

 

 

• Mode 3

 

 

 

 

• Mode 4

 

 

 

 

• Mode 5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A bootable CD-ROM may have a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present, since the C: designator is always reserved for the internal hard drive. The boot sequence ignores the new drive designations, but your application software will use the new designations.

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents LifeBook C Series Model C2310 BIOS GuideFujitsu LifeBook C SeriesC Series BIOS BIOS SETUP UTILITYEntering the BIOS Setup Utility Navigating through the Setup UtilityC S e r i e s B I O S Warning! Error message ContinueTable 1 Fields, Options and Defaults for the Main Menu MAIN MENU - SETTING STANDARD SYSTEM PARAMETERSNote that actual drive labels shown may vary M a i n M e n u Auto Primary Master Submenu of the Main MenuEnabled DisabledDescription Standard Secondary Master Submenu of the Main MenuWhen you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the Esc key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys Exiting from Main MenuSee Navigating through the Setup Utility for more infor- mation ADVANCED MENU - SETTING DEVICE FEATURE CONTROLSA d v a n c e d M e n u Table 4 Fields, Options and Defaults for the Advanced MenuEnabled Serial/Parallel Port Configuration Submenu of the Advanced MenuAll I/O addresses in Table 5 are in hexadecimal Description DefaultMenu Field OptionsDescription Security Keyboard/Mouse Features Submenu of the Advanced MenuExit Main Video Features Submenu of the Advanced MenuInternal Device Configurations Submenu of the Advanced Menu Figure 9. CPU Features Submenu CPU Features Submenu of the Advanced MenuSCSI subclass in the mass storage class e.g., USB Memory USB Features Submenu of the Advanced Menuaware OS. When Disabled is selected, Legacy USB Emula When Enabled is selected, USB devices that belong to theDisabled Miscellaneous Configurations Submenu of the Advanced MenuEvent Logging Submenu of the Advanced Menu Enabled SECURITY MENU - SETTING THE SECURITY FEATURESBoot DisabledSet User Password Table 13 Fields, Options and Defaults for the Security MenuPassword on Boot Advanced Hard Disk Security Submenu of the Security MenuESC Exit Exiting from the Security Menu Owner Information Submenu of the Security MenuThe Owner Information Submenu is for setting owner information Table 16 Fields, Options and Defaults for the Boot Menu BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCEExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuINFO MENU - DISPLAYS BASIC SYSTEM INFORMATION Table 18 Fields, Options and Defaults for the Info MenuTable 19 Fields, Options and Defaults for the Exit Menu EXIT MENU - LEAVING THE SETUP UTILITYmemory. The message Save configuration changes now? Yes No will fields. The message Load previous configuration now? Yes No will be
Top Page Image Contents