Fujitsu Siemens Computers N3520 manual Exit Menu Leaving the Setup Utility, Exit No Save

L i f e B o o k N S e r i e s N o t e b o o k B I O S

EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through The Setup Utility on page 2 for more information.)

The following table shows the names of the menu fields for the Exit menu and a description of the field's func- tion and any special information needed to help under- stand the field's use.

Exit

		Save and Exit
		Exit (No Save)
		Default Settings
		Restore Settings
		Save Changes
		Save Changes and	Power Off
		Figure 21. Exit Menu
Table 21: Fields, Options and Defaults for the Exit Menu
Menu Field	Description
Save and Exit	Save and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup
	utility. A confirmation message asking if you want to save the current parameters will be displayed. Click [OK] to
	save and exit, or [Cancel] to close the Save and Exit window. This action can also be accomplished by pressing the
	[F10] key.
Exit (No Save)	Exit (No Save) will exit the setup utility without savings any changes you may have made. A confirmation message
	asking if you want to exit will be displayed. Click [OK] to exit, or [Cancel] to close the Exit (No Save) window.
Default Settings	Selecting Default Settings will display a message asking if you want to load the default settings. When confirmed
	the setup utility will return to the Information Menu. This action can also be accomplished by pressing the [F9] key.
Restore Settings	Selecting Restore Settings will load the previous values in BIOS memory for all menu fields. A message asking if you
	want to load original custom settings will be displayed. When confirmed the setup utility will return to the Exit
	menu.
Save Changes	Selecting Save Changes will save any changes you’ve made into the BIOS memory for all menu fields. A message
	asking if you want to restore the current setup to the original custom values will be displayed. When [OK] is pressed,
	the changes will be saved.
Save Changes and	Selecting Save Changes and Power Off will save any changes you’ve made into the BIOS memory for all menu
Power Off	fields, then the system will power off. A message asking if you want to restore the current setup to the original cus-
	tom values will be displayed. When [OK] is pressed, the changes will be saved and the system will shut down.

20