Fujitsu Siemens Computers N3520 manual Hard Disk Drive Sequence Submenu of the Boot Menu

B o o t M e n u

Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field	Description
+Floppy Disk Drive	The boot selections determine the order in which the BIOS searches for the operating system during a startup
	sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and then press the
+Hard Disk Drive	[PgUp] or [PgDn] key to change the order number.
CD-ROM Drive	[Network Boot] only appears if [Preboot Execution Environment] is enabled.
Network Boot	NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
	depending upon your operating environment.

NOTE: Bootable USB drives and thumb drives will be listed under the Hard Disk Drive heading.

Hard Disk Drive Sequence Submenu of the Boot Menu

The Hard Disk Drive Sequence Submenu is for setting the order in which multiple hard disk drives are sequenced.

	Boot Menu
	Hard Disk Drive Sequence
424040M9AT00			Intel(R)
	__ Pre-Boot Execution Environment
SHITADVD-RAM UJ-831S			Speed:
x	Boot Device Priority		L1 Cache
	TOSHIBA MK6026GAX		L2 Cache
xx/xx	Hard Disk Drive Sequence
0h - FFFFh
s:	Clear
	Clear
rd Is:	OK	Cancel	Total:l
			Slot
	Clear		Slot

Figure 20. Hard Disk Drive Sequence Submenu

Table 20: Fields, Options and Defaults for the Hard Disk Drive Sequence Submenu of the Boot Menu

Menu Field	Description
Device Name	When more than one hard disk drive is attached to the system, the selection order determines the order in which
.	the drives are sequenced during boot up. To change the order, highlight one source by using the [up] or [down]
.	cursor keys and then press the [PgUp] or [PgDn] key to change the order number.
.
Device Name

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or move to another menu. If you wish to exit from the setup utility press the Esc key then, if you wish to move to another menu, use the cursor keys.

19