Fujitsu Siemens Computers P1610 manual Security Chip Setting Submenu of the Security Menu, Exit

S e c u r i t y M e n u

Security Chip Setting Submenu of the Security Menu

The Security Chip Setting Security submenu is for configuring security chip features.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings	Exit
	Hard Disk Security			Item Specific Help
Security Chip:		[Enabled]		Select Security Chip
				enabled or disabled.
Clear Security Chip		[Enter]
Security Chip State:		Enabled		* A reboot is required
				after exit to configure
		Activated
				Security Chip correctly.
				Clear Security Chip
				becomes selectable
				after the reboot.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 15. Table 16: Security Chip Setting Submenu

Table 16: Fields, Options, and Defaults for the Security Chip Setting Submenu of the Security Menu

Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.

Menu Field	Options		Default	Description
Security Chip:	■	Disabled	[Enabled]	Allows you to enable or disable the Security Chip. When disabled,
	■	Enabled		the following field does not appear.
Clear Security Chip		____	[Enter]	Allows you to clear the security chip. Note that if you clear the secu-
				rity chip, you will not be able to access data that has already been
				encrypted.
Security Chip State:		____	Enabled	Display only. Indicates the current state of the security chip.
			Activated

23