Fujitsu Siemens Computers P1610 manual Drive0 Submenu of the Main Menu

L i f e B o o k P 1 6 0 0 N o t e b o o k B I O S

Drive0 Submenu of the Main Menu

The Drive0 submenu identifies which ATA devices are installed.

Note: Actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.

		PhoenixBIOS Setup Utility
Main	Advanced	Security			Power	Boot	Info	Exit
	Drive0 [TOSHIBA MK6006GAH]							Item Specific Help
Type:							Select Serial ATA/IDE
				[Auto]
		LBA Format					drive installed here.
Total Sectors:			117210240				[Auto]
Maximum Capacity:			60012MB
							The BIOS auto-types the
Multi-Sector Transfers:			[16 Sectors]				drive on boot time.
LBA Mode Control:			[Enabled]				[None]
Transfer Mode:			[Multiword DMA 2]
Ultra DMA Mode:			[Disabled]				The drive is disabled.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/SpaceChange Values

Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

			Figure 2. Drive0 Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the Serial ATA/IDE device type. Select Auto to have the type auto-
	■	None		matically identified by the BIOS at POST. If None is selected, all of the fol-
				lowing Set-up items do not appear.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum	---		---	The maximum capacity of your hard disk
Capacity:
Multi-Sector	■	Disabled	[16 Sectors]	The best option is selected by the BIOS automatically when Auto is
Transfers:	■	2 Sectors		selected and cannot be selected by the user. Specifies the number of sec-
	■	4 Sectors		tors per block for multiple sector transfer.
	■	8 Sectors
	■	16 Sectors

6