Fujitsu Siemens Computers A6030 manual Hard Disk Security Submenu of the Security Menu, Password

S e c u r i t y M e n u

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

Phoenix TrustedCore(tm) Setup Utility

Info System Advanced Security Boot Exit

Hard Disk Security

Item Specific Help

Drive0 Password Is:	Clear
Set Drive0 Password	[Enter]
Password Entry on Boot:	[Enabled]

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 14. Hard Disk Security Submenu

F9 Setup Defaults

F10 Save and Exit

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description
Drive0 Password Is:	___		Clear	Display-only. Default is Clear. When the Drive0 Password has been set, the field
				changes to Set. When this password is set, the primary hard disk drive cannot be
				used in another system unless the password is entered.
Set Drive0	___		[Enter]	Sets, changes or cancels the Drive0 Password. The Drive0 Password may be up to
Password:				seven characters long and must include only letters or numbers (no symbols). Pass-
				words are NOT case-sensitive. When a Drive0 Password is set, it must be used to
				access the hard drive if it is used in another system. Note that the password will not
				take effect until the system has been rebooted.
Password Entry on	■	Disabled	[Enabled]	When set to disabled, entry of a Hard Disk Password is not required before OS boot.
Boot:	■	Enabled		(The hard disk is still password-protected without password entry.)

21