Fujitsu Siemens Computers A6030 manual Drive0 Selects the Drive0 Product, Serial ATA drive Number

Page 6

L i f e B o o k A S e r i e s B I O S

Table 2: Fields, Options and Defaults for the System Menu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options		Default	Description


Drive0	Selects the Drive0		The product	Display the type of device on this ATA/IDE interface. Pressing the
	Serial ATA drive		number of the hard	Enter key selects the Serial ATA Drive0 submenu allowing additional
	submenu		drive.	device configuration options for this interface.

Drive1:	Selects the Drive1		The product	Display the type of device on this ATA/IDE interface, if there is one.
	Serial ATA drive		number of the	Pressing the Enter key selects the Serial ATA Drive1 submenu allow-
	submenu		optical drive.	ing additional device configuration options for this interface.

Language:	■	English (US)	[English (US)]	The default setting differs between the US/European and the
	■	Japanese (JP)		Japanese model. Selects the display language for the BIOS.

6

Image 6

Contents Fujitsu LifeBook Series Using the TrustedCore Menu Bios Setup UtilityEntering the Bios Setup Utility Navigating through the Setup UtilityF o M e n u ESC Exit Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information EnterAdvanced Security Boot Exit System Menu Setting Standard System ParametersFields, Options and Defaults for the System Menu InfoDrive0 Selects the Drive0 Product Serial ATA drive Number of the hardSerial ATA drive Number Advanced Security Following Setup items do not appearDrive0 Submenu of the System Menu AutoMode Drive to select the optimum transfer mode Boot ExitSet to mode 2 for Fast PIO 4 / DMA Drive1 Submenu of the System MenuExiting from System Menu Advanced Menu Setting Device Feature Controls Fields, Options and Defaults for the Advanced MenuInfo System Advanced Security Boot Exit USB Features Scsi SubClass supportMiscellaneous Info System Keyboard/Mouse Features Submenu of the Advanced MenuSecurity Boot Exit OffVideo Features Submenu of the Advanced Menu Display Internal Flat Panel AutoExternal Overridden after Windows starts up Autos Internal Device Configurations Submenu of the Advanced Menu EnabledCPU Features Submenu of the Advanced Menu CPU Features SubmenuKey are enabled. Note that enabling this feature may cause USB Features Submenu of the Advanced MenuWhen Enabled is selected, Legacy USB Emulation is enabled USB devices are available without a USB-aware OSMiscellaneous Configurations Submenu of the Advanced Menu Disables this featureEvent Logging Submenu of the Advanced Menu Event Logging SubmenuSecurity Menu Setting the Security Features Boot ExitFields, Options and Defaults for the Security Menu Exiting from the Security MenuPassword Entry on Disabled Enabled PasswordTake effect until the system has been rebooted Hard Disk Security Submenu of the Security MenuOwner Information Submenu of the Security Menu Info System AdvancedBoot Menu Selecting the Operating System Source Fields, Options and Defaults for the Boot MenuBoot-time Disabled Boot Device Priority Submenu of the Boot Menu Exiting from Boot MenuPower Off Exit Menu Leaving the Setup UtilityFields, Options and Defaults for the Exit Menu Exit Saving