Fujitsu Siemens Computers A3130 manual Configuring the Wireless LAN, Connecting to a Network

falcon3.book Page 90 Thursday, May 24, 2007 8:44 AM

L i f e B o o k A 3 0 0 0 S e r i e s N o t e b o o k - A p p e n d i x

CONFIGURING THE WIRELESS LAN

The optional WLAN device can be configured to estab- lish wireless network connectivity using the software that is built into Windows Vista. Support for most industry standard security solutions is contained in this software.

Pre-defined parameters will be required for this proce- dure. Please consult with your network administrator for these parameters:

1.Click the Start button, then select Control Panel.

2.If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and Sharing Center icon.

3.Select “Manage wireless networks” from the left panel.

4.Click on the [Add] button.

5.Depending upon what type of connection you would like to make, make a selection. For an infra- structure network, select “Manually create a net- work profile. For ad hoc network, select “Create an ad hoc network”.

6.Enter the required information. It may be necessary to consult with your network administrator for some of the information.

7.In the event you require assistance, go to the Net- work and Sharing Center window (Start -> Control Panel -> Network and Sharing Center), and type in relevant keywords in the Search box.

CONNECTING TO A NETWORK

After you have configured your computer, you can connect to an active network by performing the following steps:

1.Click on the WLAN icon in the system tray.

2.Select “connect to a network”.

3.Select a network from the list that appears, and click the [Connect] button.

90