Cisco Systems 861W 3G Cellular Data WAN Connectivity, Wireless LAN Connectivity, Feature Summary

Page 25

Chapter 1 Product Overview

Hardware Features

3G Cellular Data WAN Connectivity

The 3G (Evolution Data Only [EVDO], Universal Mobile Telecommunications Systems [UMTS]) cellular interface is intended for use as a backup data link, but it can also be used as a primary WAN data link. The 3G technology is third-generation wide-area cellular technology that is used in voice telephony and broadband wireless data in a mobile environment.

The Cisco 88xG models come with a 34-mm express card slot ready for use with a commercial 3G card radio. The 3G express card slot is located on the front panel. For a list of supported 3G cards see the Cisco 880 series ISRs data sheet.

Wireless LAN Connectivity

The embedded wireless access point is preinstalled in the router as an optional feature. The wireless access point provides 802.11n wireless connectivity. The Cisco 860 series routers support autonomous features and network configurations. The Cisco 880 series routers support both autonomous and unified features and network configurations.

The wireless access point does not have an external console port for connections. To configure the wireless device, you must use a console cable to connect a PC to the host router’s console port as described in Chapter 3, “Connecting a Terminal or PC to the Console Port,” and then use the Cisco IOS CLI to access the interface.

Table 1-2describes the radios and antenna for the Cisco 860 series and Cisco 880 series routers.

Table 1-2

Wireless Device Radios and Antennas

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Maximum Data

 

 

Radio Module

 

Platform

Radio Band

 

Throughput1

Mode

Antenna

Single-band 802.11n

Cisco 860 &

2.4 GHz

 

Up to 100 Mbps

Cisco 860 series:

Three captive 2-dBi

draft 2.0 radio module

880 series

 

 

 

autonomous only

omnidirectional dipole

 

 

routers

 

 

 

Cisco 880 series:

antennas

 

 

 

 

 

 

 

 

 

 

 

 

 

autonomous and

 

 

 

 

 

 

 

unified

 

 

 

 

 

 

 

 

 

1. Actual data rate is highly dependent on your wireless environment.

Feature Summary

Table 1-3summarizes the hardware features available in the Cisco 860 series and Cisco 880 series ISRs.

Table 1-3

Hardware Features Available in Cisco 860 Series and Cisco 880 Series ISRs

 

 

 

 

 

 

 

 

 

 

 

 

 

Feature

 

Description

860 Series

880 Series

 

 

 

 

 

 

 

 

Reset button

 

Resets the router configuration to the factory default.

All models

All models

 

 

 

 

 

 

 

 

FE1 built-in

 

Provides connection to 10/100BASE-T (10/100-Mbps)

All models

All models

 

switch ports

 

Fast Ethernet networks. The autosensing function in these

 

 

 

 

 

 

 

 

 

routers eliminates the need for a crossover cable and allows

 

 

 

 

 

 

 

 

 

the router to detect MDI2 or MDIX3 in any other PC or hub

 

 

 

 

 

 

 

 

 

with a straight-through cable or a crossover cable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-16193-01

 

 

 

 

 

1-13

 

 

 

 

 

 

 

 

 

Image 25
Contents Text Part Number Americas HeadquartersPage Audience ObjectiveConventions OrganizationWarnung Wichtige Sicherheitshinweise Bewaar Deze InstructiesAviso Instruções Importantes DE Segurança Avvertenza Importanti Istruzioni Sulla SicurezzaVii GEM Disse Anvisninger Page OL-16193-01 Searching Cisco Documents Related DocumentationXii General Description Product OverviewLEDs Cisco 860 Series ISRsBack Panel of the Cisco 861-W ISR Cisco 880 Series ISRsUSB port Cisco 880 Series Data RoutersBack Panel of the Cisco 888-W Data Router Cisco 880 Series Voice RoutersLEDs USB port Front Panel of the Cisco 880 Series Wireless Voice RouterBack Panel of the Cisco C881SRST-W Voice Router Back Panel of the Cisco C888SRST-W Voice Router Hardware FeaturesKensington Lock Reset ButtonLEDs Color Description SeriesGreen On-VPN is connected All models Wlan LinkBRI Voice B1 Green On-BRI B1 channel is connected 3G RSSI11Memory Power over Ethernet ModuleUSB Port FanFeature Summary Wireless LAN Connectivity3G Cellular Data WAN Connectivity RTC Feature Description Series OL-16193-01 Items Shipped with your Router Equipment, Tools, and ConnectionsCisco 860 Series Cisco 880 Series Routers Additional Items Power supply cable Cisco Configuration Professional CCP CDConnections Ethernet DevicesInstalling on a Table Installing the RouterMounting on a Wall Wall-mount Holes on the Underside of the Router Router Mounted on the Wall Chassis Ground Connection Using Ring Terminal Installing the Router Ground ConnectionConnecting the Router Preventing Damage to the Router Preparing to Connect the RouterNIC Connecting a PC, Server, or WorkstationConnecting a Phone Connecting a PhoneTurn on the Ethernet switch Connecting an External Ethernet SwitchTerminal Emulator Settings Connecting a Terminal or PC to the Console PortConnecting a Data BRI Port On the splitter Connecting the Data BRI Port to the Isdn LineConnecting the FE4 WAN Port Connecting an FE Line-FE4 WAN PortConnecting the G.SHDSL Line Connecting a G.SHDSL Line-G.SHDSL PortConnecting the AC Adapter Connecting Power over EthernetConnecting the AC Adapter DC plug Power adapter-60 W, 12 VDC Power cord AC plug10 Securing the Power Cord Power lock clip Power cord Power adapter AC plug Connecting an FXS line12 Connecting an FXS Line 13 Connecting an FXO line Connecting a FXO LineConnecting a Voice Isdn BRI Line 14shows a Voice BRI line connection LEDs to Check Normal Patterns Verifying ConnectionsLEDs to Check Normal Patterns Cisco IOS CLI Cisco Configuration Professional ExpressIOS CLI Press Return or Enter. The following message is displayedFollowing message is displayed Setup Command FacilityEnter a hostname for the router this example uses Router Configuration is displayedInitial Configuration of the Wireless Access Point Verifying the Initial ConfigurationOL-16193-01 Table A-1lists the system specifications for the routers Router SpecificationsDescription Design Specification Physical Dimensions Router Power Adapter Wireless Access PointInline Power-over-Ethernet Adapter Description Design SpecificationShdsl Port Connector Pinouts Console Port Connector PinoutsLAN Port Pinouts Pin FunctionVoice Isdn BRI Interface Pin Numbers and Functions Data BRI Port Connector PinoutsTIP Port0 Table A-6provides pinouts for the Data BRI portEthernet Cable Specifications Cable SpecificationsMaximum Cable Length Type CategoryOL-16193-01
Related manuals
Manual 144 pages 50.75 Kb

880, 860, 861W, 861, 861WGNPK9RF specifications

Cisco Systems has long been a leader in networking solutions, and its range of products includes the 860, 880, 861WGNPK9RF, and 861, HIG880 series. These devices are integral for businesses looking to enhance connectivity, improve productivity, and secure their networks. Each model brings distinct features and technologies that cater to various networking needs.

The Cisco 860 series is designed for small to medium-sized businesses, offering secure and reliable connectivity. These routers support advanced security features, including integrated firewalls and VPN capabilities, ensuring that sensitive data remains protected. The 860 series also features a robust set of WAN options, including support for 3G, 4G, and LTE connections, allowing for flexible deployment in various environments.

Moving on to the 880 series, this product is packed with features that enhance both performance and reliability. It supports multiple WAN connections and includes dual Ethernet ports for load balancing and redundancy. The 880 series also supports power over Ethernet (PoE), enabling users to power devices such as IP phones and security cameras directly from the router, simplifying installations and reducing cable clutter.

The 861WGNPK9RF model is particularly notable for its wireless capabilities. It integrates advanced 802.11ac Wi-Fi technology, providing high-speed wireless connectivity. This router is ideal for environments where mobility is essential, enabling seamless connectivity for laptops, smartphones, and other wireless devices. Its advanced security features, including secure wireless protocols and guest access controls, help businesses manage user access while maintaining network integrity.

In contrast, the 861 model focuses on delivering performance for traditional wired connections, suited for environments requiring reliable fixed-line connectivity. It boasts advanced routing capabilities and supports multicast protocols, making it a strong choice for businesses that utilize video streaming and conferencing solutions.

Lastly, the HIG880 model stands out with its high-speed throughput and enhanced security protocols. It features advanced Quality of Service (QoS) settings to prioritize bandwidth for critical applications, ensuring optimal performance for voice and video traffic.

In summary, Cisco's 860, 880, 861WGNPK9RF, 861, and HIG880 series routers offer a robust combination of performance, security, and flexibility. These devices cater to various business needs, from small enterprises to larger organizations undergoing digital transformation. With their advanced features and reliable performance, Cisco continues to set the standard for networking solutions in an increasingly interconnected world.