Cisco Systems H.323 appendix RAS Parameters, Parameter Name Description Type Example

Chapter 3 Provisioning the Cisco HSI

H.323 Stack Configuration

RAS Parameters

Note

Note

Note

The parameters in Table 3-8are required for RAS stack initialization. To modify the RAS parameters, use the ras MML name variable for the prov-add, prov-dlt,and prov-edcommands.

In the following example, the prov-addcommand sets the RAS parameter maxfail to the value 3.

Example

prov-add:name=ras,maxfail=3

The array index [i] in some of the parameter names in the first column of Table 3-8must be replaced with a valid braced index from 1 to 20, and must be continuous and unique (that is, it must contain no duplicates).

The Update Type column in Table 3-8shows when the change to a parameter takes effect after it is modified:

•Immediate means that the effect of the change is immediate.

•Start means that the application needs to be restarted for the change to take effect.

•Next Call means that the next call has the new parameter set.

Immediate and next call update types are dynamic system data.

The RAS parameter overlappedSending is not available here because it has been combined with the Q.931 overlappedSending parameter. If you set the Q.931 overlappedSending parameter, you also set the the RAS overlappedSending parameter.

The asterisk (*) after a parameter name in the first column of Table 3-8denotes a mandatory RADVision parameter with an inbuilt default value that will be used if the value is not set in provisioning.

Table 3-8 RAS Parameters

Parameter Name	Description	Type	Example	Update Type
manualRAS	If this parameter is present,	NULL	—	Start
	the stack does not perform
	automatic RAS procedures
	(it waits to be driven by the
	application).
responseTimeOut*	The time (in seconds) that	INTEGER(1, 200)	10	Immediate
	the stack waits until it
	notifies the application that
	the called party has failed to
	respond to a transaction.
maxFail*	Maximum number of retry	INTEGER(1, 200)	3	Immediate
	gatekeeper registration
	attempts.
		Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14					3-13