Cisco Systems CRS-1 manual Rotating the Adapter 180 Degrees to Clean All Ferrules

Page 22

Chapter 1 Overview

Using the Fujikura IBC Cleaning Tool

Step 4 To clean the surface, advance the white thumb wheel until you hear two hard clicks. This action moves a continuous roll of lint-free cleaning cloth across the surface of the fibers, removing dust and other contaminants. The cleaning tool holds enough cloth to clean well over 100 ferrules.

Note The thumb wheel makes a series of soft clicks followed by a “hard click” when turned. The hard click is represented by six large notches along the edge of the thumb wheel. Always advance the thumb wheel until you hear two hard clicks.

Step 5 Rotate the adapter 180 degrees to clean the remaining ferrules, as shown in Figure 1-9.

Figure 1-9 Rotating the Adapter 180 Degrees to Clean All Ferrules

138669

 

1

 

2

3

 

 

 

 

 

1

Install the adapter and clean the

3

Install the adapter and clean the

 

 

first set of ferrules.

 

remaining ferrules.

 

 

 

 

 

 

2

Rotate the adapter 180 degrees.

 

 

 

 

 

 

 

 

 

 

 

 

 

Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide

1-10

OL-8179-02

 

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Corporate Headquarters Cisco Systems, Inc. All rights reserved N T E N T S Information About Cleaning the Bulkead Array Connectors Objective AudienceDocument Organization Document ConventionsObtaining Documentation Related Cisco CRS-1 DocumentationChanges to This Document Hardware DocumentsProduct Documentation DVD Documentation FeedbackCisco.com Ordering DocumentationReporting Security Problems in Cisco Products Cisco Product Security OverviewObtaining Technical Assistance Submitting a Service RequestCisco Technical Support & Documentation Website Definitions of Service Request Severity Obtaining Additional Publications and InformationXii Inspection and Cleaning OverviewFiber-Optic Connectors in a Multishelf System General Reminders and WarningsOIM Fiber-Optic Connections in an LCC Rear View of Chassis About the Cisco CRS-1 Fiber-Optic Cleaning Kit Contents of the Cleaning KitOIM/S13 Array Adapter Description of the Fujikura IBC Cleaning Tool OIM Hbmt AdapterFujikura IBC Cleaning Tool and Clear Protective Cap Using the Fujikura IBC Cleaning Tool Fujikura IBC Cleaning Tool Head and Alignment EdgeRotating the Adapter 180 Degrees to Clean All Ferrules Cleaning the Optical Array Cable Connectors How to Clean the Optical Array Cable Connectors Example of Adapter Placement on Array CableCleaning an Optical Array Cable Connector OL-8179-02 Cleaning the Bulkhead Array Connectors How to Clean the Bulkhead Array Connectors Cleaning the Bulkhead Array Connectors Cleaning tool Bulkhead array connector OIM/S13 array adapter Page OL-8179-02 Cleaning the S2 Hbmt Connectors Information About Cleaning the S2 Hbmt ConnectorsCleaning the S2 Hbmt Connectors Cleaning the S2 Hbmt Connectors138665 OL-8179-02 Cleaning the OIM Hbmt Connectors Information About Cleaning the OIM Hbmt ConnectorsHow to Clean the OIM Hbmt Connectors Cleaning tool OIM Hbmt connector OIM Hbmt adapter Shutters closed Shutters fully open Page OL-8179-02 D E IN-2 IN-3 IN-4
Related manuals
Manual 6 pages 31.8 Kb Manual 46 pages 40.34 Kb Manual 54 pages 8.79 Kb

CRS-1 specifications

Cisco Systems' Carrier Routing System (CRS-1) is a cutting-edge, high-capacity router designed to meet the demands of service providers and large enterprises. Introduced in the early 2000s, the CRS-1 represents a significant leap forward in routing technology, offering unparalleled performance, scalability, and reliability.

One of the primary features of the CRS-1 is its exceptional scalability. The system is built on a modular architecture that allows for easy upgrades and expansions. This enables service providers to start with a configuration that suits their immediate needs while having the flexibility to expand as traffic demands grow. The CRS-1 supports a wide range of line cards, enabling data, voice, and video to be managed on a single platform, which simplifies network management and reduces operating costs.

The CRS-1 leverages advanced technologies that enable it to deliver impressive performance. With the ability to handle up to 92 terabits per second of throughput, the router is capable of supporting a vast number of connections, making it well-suited for large-scale service providers and data centers. This level of performance is powered by Cisco’s proprietary silicon technology, which optimizes the packet forwarding process and enhances overall efficiency.

Another key characteristic of the CRS-1 is its strong focus on reliability and redundancy. The system is designed with high availability in mind, ensuring that it can continue to operate seamlessly even in the event of hardware failures. Redundant components, such as power supplies and route processors, allow the CRS-1 to maintain its performance and uptime, a critical requirement for mission-critical network operations.

Additionally, the CRS-1 supports a wide variety of protocols and technologies, including Internet Protocol (IP), Multiprotocol Label Switching (MPLS), and various service provider features. This versatility makes it a compelling choice for organizations looking to implement advanced networking capabilities, such as Quality of Service (QoS) and traffic engineering.

In summary, the Cisco Systems CRS-1 stands out as a formidable solution for modern routing needs. Its modular design, exceptional scalability, robust performance, reliability, and support for multiple protocols and services make it an ideal choice for service providers and enterprises seeking to future-proof their networks. As the demand for bandwidth continues to surge, the CRS-1 remains a pivotal component in the evolution of networking infrastructure.
Top Page Image Contents