Fujitsu Siemens Computers Manufacturers notes, Cleaning noteC551, Transport notes, Energy Star

Page 11

Color monitor C551

Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include this manual.

Cleaning noteC551

Always pull out the power plug before you clean the monitor.

Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic.

Ensure that no liquid will run into the system.

Ensure that the ventilation areas of the monitor are free.

When cleaning the surface of the screen, always use a soft, slightly damp cloth in order to avoid scratching the glass.

Wipe the monitor housing with a dry cloth. If the monitor is particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out.

Transport notes

When transporting the monitor ensure that it is not exposed to strong magnetic fields.

Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts.

Above all, never drop the monitor. If the CRT is damaged, there is a risk of implosion!

Manufacturer's notes

Energy Star

The Fujitsu Siemens Computers color monitor C551 is designed to conserve electricity by dropping to less than 10 W when it goes into standby/suspend mode and to less than 5 W when it goes into OFF mode. With this new power management the C551 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award.

The EPA estimates that computer equipment uses 5 % percent of all business electricity and it is growing rapidly. If all desktop PCs and peripherals enter a low-power mode when not in use, the overall savings in electricity could amount to $ 2 billion annually. These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles.

As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.

CE certificate

The shipped version of this device complies with the requirements of the EEC directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".

Note on X-ray radiation

This device complies with the German X-ray regulations (Röntgenverordnung - RöV). The local dosage emitted is less than 1 µSv/h (micro-Sievert per hour) at a distance of 0.1m.

A26361-K610-Z100-3-5E19

English - 3

Image 11
Contents C551 Sie haben Page A26361-K610-Z100-1-5E19 Ausgabe Juli 2000 July 2000 edition Betriebsanleitung Operating ManualPage Contents Page Further information IntroductionNotational conventions Target groupImportant notes SafetyEnergy Star Cleaning noteC551Manufacturers notes Transport notesFCC Class B Compliance Statement Important note on power cableFor the United Kingdom Power cable for devices distributed in the US and CanadaDisposal and recycling Installing an ergonomic video workstation Checking the contents of the consignmentAttaching the monitor base Connecting the monitor Operation of the monitor Switching the monitor onSwitching the monitor off Adjusting the brightness and contrast Changing the monitor settingsCorrecting distortion Adjusting size and positionActivating the factory settings Storable display modes Technical dataDimensions and weight AccessoriesEnvironmental conditions Preset operating modesVESA-DDC-compatible VGA interface Electrical dataPin Meaning Pin assignment D-SUBError handling