Color monitor C551
Electrical data |
|
|
Video: | analog, positive, 0.7 Vpp, 75 Ohm | |
Synchronization: | TTL | |
Horizontal frequency: | 30 kHz .... 54 kHz | |
Refresh rate: | 50 | Hz .... 120 Hz |
Maximum pixel rate: | 70 | MHz |
Power supply: | 100 V - 240 V ± 10% | |
| 60 | Hz/50 Hz ± 3 Hz, < 1.5 A |
Power consumption (see power | < 65 W (ON, Normal mode) | |
management): | < 15 W (Standby mode) | |
| < 15 W (Suspend mode) | |
| < 5 W (OFF mode) | |
Environmental conditions |
|
|
Environment class 3K2, IEC 721 |
|
|
Rated range of operation: | 15 | °C .... 35 °C |
Humidity: | 10 % .... 80 % | |
Limit range of operation: | 0 °C .... 40 °C | |
Humidity: | 10 % .... 80 % | |
Condensation must be avoided. |
|
|
VESA-DDC-compatible VGA interface
Your monitor is equipped with a
i | If the monitor C551 is not yet displayed in the list of monitors, you can select one of the |
following monitors instead: | |
| Fujitsu Siemens 154V or Siemens MCM 153V, MCM 1404, MCM 1405 ND |
Preset operating modes
The display position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").
14 - English |