Cisco Systems Cisco 12016 manual Expanding the Scissor-Jack Platform to Support the Router

Unpacking the Router

Step 3 Use the 3/4-inch (19-mm) socket and ratchet wrench to turn the scissor-jack screw counterclockwise to expand the scissor-jack platform and lower the base of the scissor-jack platform to the floor (Figure 9).

Continue turning the screw until the platform supports the weight of the router and barely begins to lift the pallet.

Figure 9	Expanding the Scissor-Jack Platform to Support the Router
	6
	5	5
	4	4
	3	3
	2	2
	1	1
	0	0

29941

Step 4 Remove the bolts that fasten the remaining six hold-down brackets to the top of the pallet body (see Figure 4 on page 10).

Caution At this point, the weight of the chassis is supported by the scissor-jack platform. Have one person hold the chassis to ensure that it is stable.

Step 5 Slide the pallet body away from the base of the scissor-jack platform and set it safely aside (see Figure 5 on page 11).

Warning Do not attempt to lift the chassis with the handles on the back and sides of the router chassis. These handles are not designed to support the weight of the chassis, and should be used only to steady and guide the chassis while it is being inserted into or removed from an equipment rack. To reduce the risk of damage to the chassis and serious bodily injury, do not use these handles to lift or support the chassis.

	Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
78-16081-02		15