Cisco Systems Cisco 12016 manual Removing Hold-Down Bracket Bolts from the Shipping Pallet

Unpacking the Router

To remove the router from the shipping pallet and move it to the rack, follow these steps:

Step 1 Remove the two hold-down brackets attached to the front of the scissor-jack platform.

a.Remove the bolts that fasten the two front hold-down brackets to the top of the shipping pallet (Figure 6).

Figure 6 Removing Hold-Down Bracket Bolts from the Shipping Pallet

Blocking plate

29938

Caution The blocking plate is a safety feature to prevent you from removing the lateral bolts from the sides of the scissor-jack platform. Do not do inhibit the intent of the blocking plate.

	Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions
12	78-16081-02