Installation in a UPS
Overview
Step 1: Turn off all power
You can install the Management Card in a card slot in a
You do not need to turn power off for a Symmetra UPS.
(Smart-UPS or Matrix-UPS)
Caution
Damage to the UPS or Management Card can result if you do not remove all AC and DC power from a
1.Turn off the equipment that connects to the UPS.
2.Disconnect the UPS from its AC input source.
3.Press the OFF button on the UPS for approximately five seconds to turn off the DC (battery) power.
1.Turn off the equipment that connects to the UPS.
2.Turn off the circuit breaker on the rear panel of the UPS.