How to Access a Configured Network Management Card
FTP | You can use FTP (enabled by default) to download new |
| firmware to a Management Card, or to access a copy of a |
| Management Card’s event or data logs. |
| 1. At a command prompt, type ftp address and press |
| ENTER, where address is the Management Card’s IP |
| address. |
| 2. Enter the User Name and Password (apc by default). |
APC | You can use the APC Management Card Wizard to configure |
Management | multiple Management Cards over the network. |
Card Wizard |
|
Analog modem | The AP9618 Network Management Card EM/MDM has an |
(AP9618) | internal analog modem you can use for |
| Management Card’s control console. |
