Installation in a UPS
Step 2: Install If you are installing the Management Card in a Symmetra UPS
the Network that uses more than one APC management product, see
Management Installation of Multiple Management Cards, a copy of which
Cardcame with the Management Card. You must install the APC management products in the correct order for them to operate properly.
The Network Management Card is sensitive to static electricity. When handling the
Management Card, touch only the end plate
while using one or more of these electrostatic- Caution discharge devices (ESDs): wrist straps, heel
straps, toe straps, or conductive shoes.
1.Use the same screws that hold the slot cover in place to secure the Management Card in the UPS card slot.
2.Connect a network interface cable to the
3.Reconnect the UPS to its input power source.
4.Turn on the UPS.
5.See “Quick Configuration” on page 10.
Probe | Modem |
