Adding or Replacing an AC PEM
Troubleshooting the Installation
Table 1 contains troubleshooting information for the AC PEM:
Table 1 AC PEM Troubleshooting
Symptom | Description |
|
|
System fails to power on | Check that: |
| • All AC power cords are properly |
| connected to the Cisco 10000 and |
| at the power connection end. |
| • The PEM power switches are in |
| the On position. |
| – The AC PEM POWER LED |
| should be on (green). |
| • The blower module is fully |
| inserted and the FANS OK LED is |
| on (green). |
|
|
AC PEM Fault LED is on | The PEM is not operating correctly |
(yellow) | (see the Cisco 10000 ESR |
| Troubleshooting Guide). |
|
|
|
| Cisco 10000 ESR AC Power Entry Module Installation |
|
|
|
|
| ||
|
|
| 19 | |
|
|
|