Cisco Systems ASR1000 manual Tools and Equipment, Checking the Shipping Container Contents

Page 20

Chapter 3 Preparing Your Site for Installation

Tools and Equipment

Step 1 Each person should stand on either side of the chassis and place one hand under the air intake at the bottom front of the chassis.

Step 2 With the other hand, grasp the top rear of the chassis under the air exhaust and carefully lift the chassis.

Tools and Equipment

The tools and equipment listed below are recommended as the minimum necessary to install the Cisco ASR 1000 Series Router. You may need additional tools and equipment to install associated equipment and cables. You may also require test equipment to check electronic and optical signal levels, power levels, and communications links.

Phillips hand screwdriver

A 3.5mm flat-blade screwdriver

Tape measure (optional)

Level (optional)

Power drill

Unpacking and Verifying Shipping Contents

When you receive your chassis, perform the following steps and use the shipping contents checklist from the next section:

Step 1 Inspect the box for any shipping damage. (if there is damage contact your service representative). Step 2 Unpack the Cisco ASR 1000 Series Router.

Step 3 Perform a visual inspection of the chassis.

Step 4 After you have unpacked the system verify that you have received all of the required components. Using the packing list as a guide, take the following steps to check the contents of the Cisco ASR 1000 Series Router shipping container:

Step 5 Check the contents of the boxes containing accessory items. Verify that you have received all equipment listed in your order.

Step 6 Check that all Cisco ASR 1000 Series RP1s, Cisco ASR1000-ESP10s, Cisco ASR1000-ESP5, Cisco ASR 1000 Series SPA Interface (SIPs), and power supplies you ordered are installed in the chassis. Ensure that the configuration matches the packing list.

Checking the Shipping Container Contents

Use the components list to check the contents of the Cisco ASR 1000 Series Router shipping container. Do not discard the shipping container. You need the container if you move or ship the Cisco ASR 1000 Series Router in the future.

 

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

3-20

OL-13208-01

Image 20
Contents Preparing Your Site for Installation A P T E RCompliance Requirements Safety RecommendationsSafety Warnings General Safety Warnings Safety Compliance and Nebs RequirementsSpecification Description Standard Warning StatementsOL-13208-01 Page General Precautions Site PlanningPhysical Characteristics Environmental Characteristic Minimum MaximumSite Selection Guidelines Site Environmental RequirementsPhysical Characteristics of Cisco ASR 1000 Series Router Site Power Guidelines Floor Loading ConsiderationsElectrical Circuit Requirements Minimum MaximumDescription Specification Site Cabling GuidelinesElectromagnetic Interference Asynchronous Terminal ConnectionsInterference Considerations Precautions for Rack-Mounting Lightning and AC Power Fault InterferenceRack-Mounting and Location Guidelines Radio Frequency InterferenceLocating for Safety Locating for Easy MaintenanceRack Selection Guidelines Equipment Rack GuidelinesLocating for Proper Airflow Site Planning Requirements Site Planning ChecklistPreventing Electrostatic Discharge Damage Electrical Safety ESD Chassis Grounding StudReceiving a Cisco ASR 1000 Series Router Chassis-Lifting Guidelines Cisco ASR 1000 Series Router Packaged for ShippingChecking the Shipping Container Contents Tools and EquipmentComponent Description Received Cisco ASR 1000 Series Router Installation Checklist Verified Task Date
Related manuals
Manual 32 pages 35.44 Kb

ASR1000 specifications

The Cisco ASR 1000 Series Aggregation Services Routers are designed to meet the needs of enterprises and service providers seeking high-performance networking solutions. With a combination of scalability, reliability, and security, these routers provide an ideal platform for delivering a wide range of services in a compact form factor.

One of the standout features of the ASR 1000 is its embedded hardware architecture. It utilizes a unique Distributed Services Architecture that allows for greater resource allocation and management, resulting in enhanced performance across various applications. This architecture enables the router to dynamically balance workloads across multiple CPUs, ensuring optimal resource utilization and reducing latency.

The ASR 1000 Series supports a variety of interfaces, including Ethernet, T1/E1, and T3/E3, making it highly versatile for different connectivity options. With support for up to 200 Gbps of throughput, it can handle the growing demands of modern networks, including video conferencing, cloud applications, and data-intensive services.

Security is a paramount feature of the ASR 1000. The routers come equipped with advanced security technologies such as Cisco IOS XE software, which includes built-in encryption and secure access controls. This ensures that data remains protected in transit, allowing organizations to safeguard sensitive information while maintaining compliance with industry regulations.

Another key characteristic of the ASR 1000 is its modularity. Users can easily add or upgrade services through service modules and network interface modules, providing the flexibility needed to adapt to changing network requirements. This modular approach not only helps in managing costs but also extends the life cycle of the hardware.

In terms of manageability, the ASR 1000 Series incorporates Cisco’s Intelligent Network Services, providing comprehensive monitoring and troubleshooting capabilities. This allows network administrators to gain insights into network performance, optimize service delivery, and promptly address any issues that arise.

Finally, the ASR 1000 routers are designed for high availability, featuring redundant power supplies and fans. Coupled with advanced routing protocols and features such as Cisco’s Continuous Availability, the ASR 1000 ensures minimal downtime and uninterrupted service delivery.

In conclusion, the Cisco ASR 1000 Series Aggregation Services Routers combine performance, scalability, security, and manageability, making them an excellent choice for organizations looking to modernize their networking infrastructure while efficiently handling the demands of contemporary applications. Whether for enterprise networks or service provider environments, the ASR 1000 provides a robust and future-proof solution.