![](/images/new-backgrounds/1106495/10649519x1.webp)
Cisco Aironet Access Point Deployment Guide
Figure 9: Front View of the AP2600 and the AP 3600
The AP 2600 is a 3X4:3SS, so ClientLink does not beamform to 3SS clients; however, it does beamform at legacy, one, and two spatial stream rates. The AP 3600 is a 4X4:3SS, supporting an extra transmitter chain for additional downlink performance for all bands and clients. The AP 3600 has slightly higher performance and beamforms to legacy, one, two, and three spatial stream rates and .11ac rates when using the optional .11ac module.
The two series use the same mounting hardware and antennas. See Figure 10 for a back view.
Cisco Systems
Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Page 10 of 52