Cisco Systems 837, SOHO 97 manual Installing the Router

Chapter 2 Installation

Installing the Router

1	Two number-six, 3/4-in.	5	Maximum distance between the
	screws		router and the power supply
			(6 ft [1.8 m])
2	Distance between the two	6	Horizontal surface for placing
	screws (7 5/8 in. [19.35 cm])		the power supply.
3	Cisco 837 router	7	Distance between the screw and
			the wall (1/8 in. [0.32 cm]).
4	Mounting brackets

Perform the following steps to mount the router on the wall:

Step 1 Secure two screws 7 5/8 inches (19.35 cm) apart into a wall and 1/8 inch (0.32 cm) from the wall.

Step 2 Hang the router on the screws as shown in Figure 2-3.

Step 3 Place the power supply on a horizontal surface.

Installing the Router

To install the router, you need to perform the following tasks in the following order:

1.Connect the Ethernet devices to the router.

2.Connect the ADSL line.

3.Connect a terminal or PC to the router for software configuration using the command-line interface (CLI) or for troubleshooting.

4.Connect the router to the power source.

5.Verify the links, using the router LEDs.

	Cisco 837 Router and SOHO 97 Router Hardware Installation Guide
2-10	78-14781-02