Cisco Systems 2800 Advanced Integration Modules and Security Modules, J1 Voice Interface Cards

Cisco Interface Cards

ISDN BRI VOICE INTERFACE CARDS

		Supported Platforms
		and Minimum Cisco
Product	Description	IOS Versions	Comments
VIC-2BRI-S/T-TE	This two-port ISDN, S/T,	3700 Series – 12.2(8)T	When used in a Cisco
2-port BRI ISDN voice	terminal side, basic rate	3660 Series – 12.0(7)XK	2600, 3600 or 3700 Series
interface card	interface (BRI) voice	3640 – 12.0(3)T	Router, requires a voice/
	interface card (VIC)		fax network module:
		3620 – 12.0(3)T
	connects directly to PSTNs		NM-1V or NM-2V.
		2691 – 12.2(8)T1
	and supports both on-		Prior to Cisco IOS 12.3
		2600XM Series – 12.1(14)
	premise and off-premise
			Mainline, requires a Cisco
	connections.The VIC-2BRI-	Mainline, 12.2(12)
			IOS “Plus” feature set.
		Mainline, 12.2(8)T1
	S/T-TE supports a total of
		2650 Series – 12.1(3)T	12.3 Mainline and forward
	four voice channels in a
			supported in “IP Voice”
		2620 Series – 12.0(3)T
	single interface card via
			feature set.
	two RJ-45 physical ports,	2610 Series – 12.0(3)T
	and enables toll-bypass
	and voice-over-packet
	features.
	Modular Router Solutions
	Voice and Fax Integration

J1 VOICE INTERFACE CARDS

Advanced Integration Modules and Security Modules

COMPRESSION ADVANCED INTEGRATION MODULES

		Supported Platforms
		and Minimum Cisco
Product	Description	IOS Versions	Comments
AIM-COMPR4	The data compression	3800 Series – 12.3(11)T	No reliance on other
Cisco data compression	AIM plugs directly into	3700 Series – 12.2(11)YT	network modules, WICs,
advanced interface	one or both of the	3745 – 12.2(13)T	voice interface cards, or
	two internal advanced		advanced integration
module		3725 – 12.2(13)T
	integration module slots		modules.
		3660 Series – 12.0(5)T
	for supported Cisco
		2691 – 12.2(13)T
	routers.
	Modular Router Solutions
	Bandwidth Management

		Supported Platforms
		and Minimum Cisco
Product	Description	IOS Versions	Comments
VIC-1J1	Provides a one-port J1	3800 Series – Not	Requires a high-density
1-port J1 voice	line interface to Japanese	Supported except in	digital voice/fax network
	private branch exchanges	NM-HDV and NM-HDV2	module NM-HDV.
interface card
		3700 Series – Future
	(PBXs). It is specifically		Prior to Cisco IOS 12.3
	designed to conform	3660 Series – 12.1(3)XI
			Mainline, requires a Cisco
	with theTTC JJ-20.10-12	3640 – 12.1(3)XI
			IOS “Plus” feature set.
	standards which define	3620 – 12.1(3)XI	12.3 Mainline and forward
	the interface between a
		2811, 2821, and 2851 – Not	supported in “IP Voice”
	PBX and aTDM switch.
		Supported except in	feature set.
	This network module is
		NM-HDV and NM-HDV2
	currently designed only for
		2691 – Future
	voice and fax applications.
		2600XM Series – 12.2(8)T1
	Modular Router Solutions	2650 Series – 12.1(3)XI
		2620 Series – 12.1(3)XI
	Voice and Fax Integration
		2610 Series – 12.1(3)XI

AIM-COMPR2

Cisco data compression advanced interface module

The data compression AIM plugs directly into the Cisco 2600’s internal advanced integration module slot.This AIM provides 2E1 full duplex (2 x 2.048 Mbps full duplex) of compressed input/output.

Modular Router Solutions

Bandwidth Management

2600XM Series – 12.1(14)	No reliance on other
Mainline, 12.2(12)	network modules, WICs,
Mainline, 12.2(8)T1	voice interface cards, or
2650 Series – 12.1(3)T
	advanced integration
2600 Series – 12.0(1)T	modules.

138 139